As deck builders in Chebeague Island, ME, we plan and build new decks and complete replacements in pressure-treated wood, composite and PVC. Each plan starts with your lot, your entry height, the route materials take to the property and any existing deck.
Southern Maine Deck Builders plans and builds new decks and complete deck replacements on Chebeague Island in pressure-treated wood, composite and PVC, with island access reviewed for each property.
Basic pressure-treated decks carry a planning figure of about $80 per square foot with a $10,000 minimum. Complex or upgraded work runs about $100 to $120 per square foot, and composite projects have a $15,000 minimum. These figures are not binding quotes.
The Chebeague Island Code Enforcement office issues building permits and determines zoning compliance. Homeowners should confirm parcel zoning, shoreland status and setbacks with the town before a deck is built.
Deck builders worth choosing explain the structure under the boards before they talk about colors. We write down the ledger connection, footing plan, framing, stairs and railings in plain terms, so you can compare our scope line by line with other proposals.
For an island property, we also plan how materials, tools and our crew reach your lot.
The right deck material for a Chebeague Island home depends on how much upkeep you want, how the deck sits in sun and wind, and the budget you set. Each option below has a different care routine and cost.
Pressure-treated wood is a direct path to a sturdy, practical deck, and it carries our lowest planning figure. It has the familiar feel of real lumber underfoot and can be stained or sealed in a color you choose.
Wood does ask for regular care. Expect periodic cleaning and a fresh coat of stain or sealer as the finish weathers, especially on boards that sit in full sun.
Owners who like a seasonal project often prefer it.
Composite and PVC boards trade the staining routine for a higher starting cost, with a $15,000 project minimum. They skip stain and paint, though darker boards can feel warm on bare feet in direct sun.
These materials still need care. Each manufacturer publishes cleaning and installation instructions, and we follow the current documents for the line you select, such as the Trex installation and care downloads, which describe that product only.
Complete replacement makes sense when the existing frame, ledger or footings cannot be confirmed as sound. We review what we can see and note what stays hidden until boards come up, without guessing at a deck we have not opened.
Our replacement scope covers removal, debris handling, new supports and framing, and the new surface. Writing down the demolition and disposal plan matters on an island, where hauling old material off the property takes its own planning.
We offer three deck services in Chebeague Island, each planned around your lot, your house and the way you want to use the space. Every service starts with a site review and leads to a written scope.
The ledger ties the deck to your house, so we check the rim board and siding behind it and plan flashing that sheds water off the wall. Any damage we find goes into the scope.
Joist hangers, screws and hidden clips must suit the treated lumber and the decking line you pick. We specify hardware from the board and connector makers' current instructions so the pieces work together.
The step from your door onto the deck should feel natural and keep water out of the house. We plan the deck height against the threshold, leaving room for flashing and the door swing.
We visit the property to measure the house wall, entry height and yard, check any existing deck, and walk the delivery route from where materials arrive to where they will be staged. You then receive a written scope listing materials, structure, stairs, railings, demolition and price, so you can review every detail before you commit.
Once any required town review is complete and materials are on site, we set footings, attach and flash the ledger, and build the frame to the agreed plan. We check level, spacing and hardware at the framing stage, before decking covers the structure, and record any change in writing.
After the decking, stairs and railings are installed, we walk the finished deck with you and compare it to the written scope item by item. We also hand over the care instructions for your chosen material and clear the work area, including old deck material on replacement projects.
Footing size, spacing and depth depend on the deck's span, load and what the ground and town review show for that location. We size supports for your lot instead of copying a standard layout.
Water that collects under a deck keeps framing damp. We look at where roof and yard runoff goes, note where grading or gravel would help, and keep open space below for air to move.
Island projects need a delivery plan that reaches your yard. We note the driveway, slopes, trees, septic areas and a dry staging spot for lumber, along with any limits on how materials arrive.
Before building, we check the parcel: where the deck can sit, how high the entry is, what condition any existing deck is in, and how materials will reach your lot. We answer each one for your specific property.
The town's code enforcement officer issues building permits and determines compliance with the zoning ordinance, and the town offers an online permit-application portal. Start with the Chebeague Island official permit and code information page, then confirm parcel zoning, shoreland status and setbacks for your lot.
We record those answers in a written scope showing the supporting frame and footing layout, with a separate detail for the ledger attachment. For general background on wood deck construction, the American Wood Council deck resources offer useful reference material, while the town decides what applies to your project.
Our team plans and builds your deck under owner Adam Bennett. His carpentry interests center on the ledger attachment and frame, with attention to footing layout and clean joinery.
We are A Seth's Home Pros Company. Our parent company is a referral business and does not perform, supervise or guarantee construction or handle homeowner payments.
We build decks across all 57 towns in Cumberland and York counties, including Chebeague Island and other island communities. Island access and scheduling depend on property review, so we confirm the route before discussing dates.
See our service areas page for the full list of covered towns.
You should start planning a deck once you know how you want to use it and can walk the lot with us. Start dates depend on design decisions, material availability, town review and island access, so we discuss realistic timing after the site visit without promising a fixed date.
Guards belong wherever the deck height or stair layout calls for them under the code the town applies. We place railing posts around views, seating and gates so the layout feels open and solid.
Stairs should land where you actually walk, toward the yard, driveway or garden path. We plan the stair location, width and any landing early, because the route affects footings, railings and final cost.
Seating works best where the light suits how you use the deck. We bring real samples to your site so you can see color and feel surface heat in the exposure your deck will get.
A deck in Chebeague Island costs about $80 per square foot for basic pressure-treated wood, with a $10,000 minimum. Complex or upgraded work runs about $100 to $120 per square foot.
Composite projects have a $15,000 minimum and get project-specific quotes. A minimum overrides area times rate.
| Deck project | Planning figure | Minimum |
|---|---|---|
| Pressure-treated wood | About $80/sq ft | $10,000 |
| Complex or upgraded work | About $100-120/sq ft | Scope dependent |
| Composite | Project-specific quote | $15,000 |
These are planning figures, not binding quotes. Your written scope sets the actual price.
Send us a few photos of your house wall, entry door and yard, along with a rough deck size. We will arrange a site visit and review access to your property before discussing timing.
