Call Now: (888) 915-4883Get a Deck Estimate

Wood and composite deck builders in Ogunquit, ME

Homeowners looking for deck builders in Ogunquit, ME can plan a new pressure-treated deck, a composite or PVC deck, or a complete replacement with us. We start with your lot, your entry height and the condition of what stands there now.

Get My Free EstimateCall Now: (888) 915-4883
Deck builders in Ogunquit, ME: low gray-board deck with table, chairs, and a step beside a cream-sided two-story house
Wood, composite & PVC
Cumberland & York counties
Written project scope

Southern Maine Deck Builders plans and builds new pressure-treated decks, composite or PVC decks and complete deck replacements in Ogunquit and across York County.

Planning figures are about $80 per square foot for basic pressure-treated work with a $10,000 minimum, about $100 to $120 per square foot for complex or upgraded work, and a $15,000 minimum for composite, which is quoted per project.

Ogunquit's building permit FAQ lists one-for-one deck replacement as permit work, so we confirm current parcel requirements with the town and record every detail in a written scope.

Why choose deck builders in Ogunquit, ME?

Most of a deck's strength sits where nobody looks, in the ledger, footings and framing that carry it through Maine winters, wet springs and years of foot traffic. We plan those parts first, record them in a written scope and explain each choice in plain terms, so you have a clear basis for comparing our proposal with any other bid.

  • Ogunquit's permit FAQ lists one-for-one deck replacement as needing a building permit, so we plan replacement projects with the town's paperwork in view from the first conversation.
  • Your written scope names the material line, stair count, railing layout, demolition and haul-away when needed, which lets you line up our proposal against other quotes item by item.
  • Our planning figures are published up front, with clear project minimums, so you can test a rough deck size against a realistic budget before anyone visits the property.
Backyard of a gray-sided house with a flagstone path, open lawn, and surrounding pine and birch trees before any deck
Get My Free EstimateCall Now: (888) 915-4883

Get your free estimate request sent in 60 seconds!

What deck project are you planning?

Check all that apply.

Pick at least one to keep going.

Roughly what budget do you have in mind?

A ballpark is plenty. It tells us which contractors are the right fit.

$25,000
$10,000$150,000+
Anything else we should know? (optional)
What is your first name?

Please enter your first name.

And your last name?

Please enter your last name.

What town is your project in?

Please enter the town.

What email should we use?

Please enter a valid email.

Last one. Best number to reach you?
+1

Please enter a phone number we can reach you on.

Please tick the box so we can get back to you.

What deck material suits Ogunquit homes?

The right material depends on how much upkeep you want, how the deck sits in the sun and how it should feel underfoot. Each option below fits a different set of priorities.

Pressure-treated wood for a practical, lower-cost deck

Pressure-treated lumber is the lowest-cost deck we build, with a natural wood feel and a straightforward look that suits a simple backyard or a busy family entry. It also takes paint or stain, so the color can change over the years.

Wood moves with the seasons, so plan on periodic cleaning and a fresh coat of sealer or stain when the surface starts to look dry. We explain that care routine before you decide, so the choice fits the time you want to spend.

Composite and PVC boards for lower routine upkeep

Composite and PVC decking skip the regular staining that wood needs, and they offer a consistent color and texture across the whole surface. Many homeowners choose them for that steady look and a lighter care routine.

These boards still need cleaning, and darker colors can feel warm in full sun, so we bring real samples to your deck site. Installation follows the selected manufacturer's current instructions, including joist spacing and fasteners.

Complete replacement when the old deck has reached its limit

Complete replacement means removing the existing deck, framing included, and building a new structure in its place. It makes sense when the framing, ledger or footings show problems that new boards alone would only cover up.

We look at the old deck before recommending anything and write down what we see, without guessing about hidden damage we cannot reach. The new layout can match the old footprint or change it, and any change goes into the written scope and the town review.

Get My Free EstimateCall Now: (888) 915-4883

What deck services do we offer in Ogunquit?

We offer three deck services in Ogunquit, each covering the full structure from footings to rails. Every project starts with a property review and a written scope you can keep and compare.

  • Pressure-treated wood decks: New decks framed and surfaced in treated lumber, sized to your yard, your entry height and your budget.
  • Composite and PVC decks: New framing topped with composite or PVC boards, installed to the chosen manufacturer's current instructions and hardware requirements.
  • Complete deck replacement: Removal of the existing deck and haul-away, followed by new footings, framing, decking, stairs and rails as the scope requires.
Get My Free EstimateCall Now: (888) 915-4883

What keeps the deck connection sound?

Ledger and flashing

Where the deck meets the house, we check the rim board and siding, then plan flashing that sheds water off the connection. Any rot we find at this line gets written down before framing starts.

Hidden fasteners and hardware

Hidden fastener systems are matched to the specific board line you choose. We use the clips, screws and connectors the manufacturer lists, along with corrosion-resistant hardware suited to treated lumber.

Door transitions

The step from your door to the deck needs a comfortable height and room for boards to move. We plan the threshold gap so a storm door clears the decking as seasons change.

Who can explain how to start a deck in Ogunquit?

  1. Man holding a clipboard listens as a woman points toward the back of a shingled house while standing on a lawn

    Site visit and measurements

    We start at your property, measuring the house wall, entry height, yard grade and the route for deliveries and debris. If a deck already stands there, we look at its framing, ledger and supports, then turn what we find into a written scope and planning price.

  2. Undecked wood deck framing with exposed joists set on a lawn behind a white-sided house, surrounded by tall trees

    Footings and framing

    Once the scope is signed and the town's permit step is handled, we set footings, attach and flash the ledger and build the frame. We check that framing for level, spacing and connections before any decking goes down, because those details are hard to reach later.

  3. Two people stand on a low finished wood deck with a step along the back of a light blue-sided house

    Final walkthrough

    After decking, stairs and rails are installed, we walk the finished deck with you and compare it against the written scope line by line. We also go over cleaning and care for your chosen material, and we leave the work area cleared of our debris and leftover materials.

Get My Free EstimateCall Now: (888) 915-4883

What should your Ogunquit lot plan show?

Footings

Footing size and spacing depend on the deck's span, its load and what we find in the ground at your property. We size supports for your site and check the plan against current town requirements.

Drainage

Roof and yard runoff should move away from the footings, and air should reach the framing underneath. We note where water goes now and keep the space below the deck open enough to dry.

Site access

Lumber deliveries, debris removal and equipment need a route to the work area. We walk that path on your property and note fences, septic areas, gardens, slopes or tight side yards that shape the schedule.

What should we check before building in Ogunquit?

Before building in Ogunquit, we check your parcel, the access route and the house connection. That means noting the property lines and markers you can show us, septic and well areas, slopes and the condition of the wall where a ledger would attach.

Ogunquit's building permit FAQ lists one-for-one deck replacement as permit work and says required documents depend on the project, so we confirm current parcel requirements with the town. The American Wood Council deck resources serve as general framing reference only.

For composite projects, we work from the selected manufacturer's current instructions, such as the documents in the Trex installation download library, without implying any brand partnership. Everything we confirm goes into a written scope you review before work begins.

Black metal railing section with vertical balusters on the edge of a weathered wood deck next to a cream-sided house
Get My Free EstimateCall Now: (888) 915-4883
Low wood deck with a wooden table and chairs and a front step behind a two-story gray-sided house on a lawn

Who builds and manages your Ogunquit deck?

Southern Maine Deck Builders builds and manages your Ogunquit deck, and owner Adam Bennett, a carpenter focused on ledgers, framing, footings and clean joinery who also restores a cedar-strip canoe, leads the planning. We are A Seth's Home Pros Company, and that referral business never performs, supervises or guarantees construction or handles money between homeowners and contractors.

Where in Southern Maine do we build decks?

We build decks across all 57 towns in Cumberland and York counties, Ogunquit included, along with island properties. Island access, delivery routes and scheduling for every property get reviewed before we commit to a plan, and you can browse our deck service areas to find your town.

When should you start planning an Ogunquit deck?

You should start planning an Ogunquit deck once you have a rough size and material in mind, since design, town paperwork and material ordering each take their own time. We set a schedule after the property review, based on your scope, site access and the town's process.

Get My Free EstimateCall Now: (888) 915-4883

How should the deck work day to day?

Railings

Guard layout depends on deck height, the view you want to keep and where people gather. We plan post spacing and rail style together so the rails feel solid and frame the yard cleanly.

Stairs

Stairs should land where you actually walk, toward the driveway, garden or side gate. We plan the route, the landing surface at the bottom and any midway landing the height calls for.

Sun and shade

Seating should sit where you like to spend time, in morning sun or late afternoon shade. We check exposure on site and set real board samples in place so you can judge color and heat.

How much does a deck cost in Ogunquit?

A deck in Ogunquit costs about $80 per square foot for basic pressure-treated work, with a $10,000 minimum, or about $100 to $120 per square foot for complex or upgraded work. Composite gets a project-specific quote with a $15,000 minimum, and minimums override area times rate.

Deck projectPlanning figureMinimum
Pressure-treated woodAbout $80/sq ft$10,000
Complex or upgraded workAbout $100-120/sq ftScope dependent
CompositeProject-specific quote$15,000

These are planning figures, not binding quotes, and your written scope sets the actual price.

Get My Free EstimateCall Now: (888) 915-4883

Deck planning in nearby York County towns

Neighboring towns

See every town we serve
Get My Free EstimateCall Now: (888) 915-4883

Ready to plan your Ogunquit deck?

Send us your address, a few photos of the house wall or existing deck and the size you have in mind. We will review the property and follow up with next steps.

Get My Free EstimateCall Now: (888) 915-4883