We plan and build new decks and complete deck replacements as deck builders in Standish, ME, working in pressure-treated wood, composite and PVC. Each project starts with your actual lot, entry height and access route, then moves to a written scope you can review.
Southern Maine Deck Builders plans and builds new pressure-treated wood decks, composite and PVC decks, and complete deck replacements in Standish, Maine.
Basic pressure-treated decks plan at about $80 per square foot with a $10,000 minimum, and complex or upgraded work plans at about $100-120 per square foot. Composite is quoted per project from a $15,000 minimum, and all figures are planning figures only.
Each project starts with a site review of the actual lot, house connection, entry height and access route, followed by a written scope. The town confirms permit needs for each address.
Choosing our deck builders for your Standish project means one team reviews your lot, writes the scope in plain terms and builds the frame and surface to match it. We cover every town in Cumberland and York counties, so Standish homeowners get the same written process, the same planning figures and a clear answer about what the site needs before any price is final.
The right deck material for a Standish home depends on how you use the space, how much upkeep you accept and what the house connection and site can support. Here is how our three services compare.
Pressure-treated lumber gives you a sturdy deck at our basic planning figure, about $80 per square foot with a $10,000 project minimum. Boards and trim can be cut, replaced and refinished on site, which keeps future repairs simple.
Wood asks more of you over time. Expect periodic cleaning and a stain or sealer schedule you are willing to keep, along with some checking and movement as boards dry and weather through the seasons.
Composite and PVC boards replace the stain schedule with routine washing, which suits owners who want less finish work. Composite projects start at a $15,000 minimum, and we price each one from the specific board line you choose.
These boards still need care. Some run warmer in direct sun, many call for specific fasteners and joist spacing, and each manufacturer publishes cleaning and installation instructions that we follow for the selected product.
Complete replacement removes the existing deck and its supports so the new frame, footings and house connection are built and documented together. It makes sense when the ledger, posts or joists are in uncertain condition.
We cannot judge an unseen deck from photos, and we do not declare an existing deck safe to use. The site review records what we can see and what demolition may reveal, and the written scope prices that work.
We offer three deck services in Standish, and each one begins with the same site review and written scope. We keep our work focused on decks, from the footings up to the last rail.
We remove siding at the ledger line, check the rim board and sheathing for water damage, and plan fasteners and layered flashing that direct water away from the wall.
Hidden fasteners are usually matched to a specific board line, so we confirm clips and joist spacing in current instructions and use connectors suited to treated lumber.
We measure from the door threshold to the planned deck surface so the step out stays comfortable, water stays outside the sill, and the boards have room to move with the seasons.
We visit your Standish property, measure the house wall, door threshold, any existing deck and the planned footprint, and walk the route materials will take from the road. You then receive a written scope listing the material, structure, demolition, stairs, rails and the planning figure behind the price.
Once you approve the scope and any required municipal review is complete, we set footings, install the ledger with flashing and build the frame. We pause at the frame stage so you can see the structure, and any required inspection can happen before decking covers it.
After decking, rails and stairs are installed, we walk the finished deck with you and check each item against the written scope. You receive the care instructions for your selected material, and we note anything that still needs attention before the project is closed out.
Footing size, depth and spacing come from the deck's loads, the conditions we find on your parcel and the requirements confirmed for your address, so we set them project by project.
The plan shows where roof and yard runoff will go and leaves enough open space under the deck for air to move, which helps framing dry after rain and snowmelt.
We walk the delivery route from the road to the build area and note driveways, septic components, trees, fences and tight side yards that affect material staging or equipment.
Before building in Standish, we check the specific parcel: where the deck meets the house, how the ground slopes, what sits below the footprint and how materials and equipment will reach the work area. Each answer shapes the layout and price.
Permit needs, setbacks and inspections are confirmed for your address with the town, and the Official Standish municipal website is the starting point for contacts and current information. We do not predict the town's decisions or review timing.
For general framing reference, the American Wood Council keeps a deck construction resource hub, and composite makers publish their own documents, such as the Trex installation downloads. Neither source replaces the town's review, and your written scope names the exact product and instructions we follow.
Our team, led by owner Adam Bennett, plans and builds your Standish deck, and Adam is a carpenter drawn to ledgers, framing, footings and clean joinery who also restores a cedar-strip canoe. We are A Seth's Home Pros Company, and that referral business does not perform, supervise or guarantee construction or handle homeowner payments.
We build decks in Standish and across all 57 towns in Cumberland and York counties, including island communities, where access and scheduling depend on a property review. You can see the full list on our service areas page, and each town page explains the same planning figures and site checks.
You should start planning a Standish deck once you know how you want to use the space, since the site review, written scope, material choice and any town review all take time. We set a schedule after reviewing your property and scope, and we do not promise a universal start or finish date.
Guard height, post spacing and infill follow the deck's height above grade and current requirements, and we place posts to keep views from inside the house as open as possible.
We plan where the stairs land, how they connect to a path or driveway, and where a landing helps, so people carrying groceries or gear have a clear route.
We note where afternoon sun hits, where seating will go, and how board samples feel in that spot, so you choose color and material after handling real samples on site.
A basic pressure-treated deck in Standish plans at about $80 per square foot with a $10,000 minimum, and complex or upgraded work runs about $100-120 per square foot. Composite is quoted per project from a $15,000 minimum, and any minimum applies when area times rate comes in lower.
| Deck project | Planning figure | Minimum |
|---|---|---|
| Pressure-treated wood | About $80/sq ft | $10,000 |
| Complex or upgraded work | About $100-120/sq ft | Scope dependent |
| Composite | Project-specific quote | $15,000 |
These are planning figures, not binding quotes, and your written scope sets the actual price.
Send us a few photos of the area, the approximate deck size and the material you are considering. We will set up a site review and start your written scope from there.
