Homeowners looking for deck builders in Lebanon, ME can plan with us for a new deck or a complete replacement in pressure-treated wood, composite or PVC. We start with your actual lot, entry height, access route and the condition of any existing deck.
Southern Maine Deck Builders plans and builds new decks and complete deck replacements in Lebanon, ME, using pressure-treated wood, composite or PVC.
Basic pressure-treated decks are planned at about $80 per square foot with a $10,000 minimum, and complex or upgraded work runs about $100 to $120 per square foot. Composite has a $15,000 minimum with a project-specific quote, and all figures are for planning only.
Each project starts with a site visit and a written scope covering the ledger, footings, framing, stairs, railings and site access, with zoning and permit scope confirmed with the Town of Lebanon.
Choosing deck builders in Lebanon, ME comes down to how clearly the hidden work is planned. We put the ledger connection, footings, framing, stairs and railings into a written scope before boards are ordered, so you can compare our proposal line by line and know what is included before work begins on your York County property.
The right material depends on how much upkeep you want, how the deck sits in sun and shade, and your budget. Here is how our three project types compare for a Lebanon property.
Pressure-treated lumber is the most budget-friendly line we build with, and it gives a deck a familiar wood look and feel underfoot. It suits homeowners who want something sturdy and practical without paying for an upgraded surface.
The tradeoff is upkeep. Wood needs periodic cleaning and a stain or sealer on a schedule that depends on sun exposure and how the deck is used, so we talk through the finish plan before you choose it.
Composite and PVC boards skip the staining cycle that wood needs, which appeals to owners who would rather spend weekends using the deck. Our composite projects start at a $15,000 minimum, and we quote each one individually because product lines vary.
These boards still need occasional cleaning, and darker colors can feel warm in full sun. We follow the selected manufacturer's current installation and care instructions, since fastening and spacing details differ between products.
When an existing deck has soft framing, loose railings or a questionable ledger, a complete replacement lets us start fresh with new footings, framing and surface. We remove the old structure and plan the new one around how you use the space now.
We do not judge an unseen deck from photos or call it safe to use. The site visit shows the actual frame, connections and supports, and the written scope records what we remove and build new.
We build three kinds of projects in Lebanon and across York County. Each one begins with a site visit and a written scope you can review before anything is ordered.
Where the deck attaches to the house, we check the rim board, the siding and how water will be shed. Flashing goes in before the ledger is fastened so water moves away from the wall.
Pressure-treated lumber and many decking lines call for specific screws, hangers and clips. We match the hardware to the lumber treatment and to the selected board maker's current instructions.
The finished deck surface needs to sit at a sensible step below the door threshold. We plan that height early so the entry stays comfortable and water does not run back toward the door.
We visit your Lebanon property to measure the house wall, entry height, grade and the space you want to use, and we walk the route materials will take. If a deck is already there, we look at its framing, ledger, supports and stairs before discussing options or price.
Once you approve the written scope and any required permits are in place, we set footings and build the frame, including the flashed ledger, beams, joists and stair stringers. We check the frame for level and fastening before any decking goes down, since it carries everything above it.
After the surface boards, railings and stairs are installed, we walk the finished deck with you and go through the written scope item by item. We point out care steps for the material you chose and make sure the work area is cleaned up before we leave.
Footing size and placement depend on deck height, span, load and what we find in the ground at your property. We plan them for your lot and confirm current requirements with the town.
We look at where roof runoff and surface water go now, and keep enough open space beneath the deck for air to move. A damp, closed-in frame dries slowly and wears faster.
Lumber, boards and equipment have to reach the work area. We note driveway space, gates, slopes, septic or well locations and anything else on your property that shapes the delivery route.
Before we price a Lebanon deck, we check the parcel itself: where the house sits, how the ground slopes, which wall the deck attaches to and how crews and deliveries reach the work area. We record these conditions for your specific lot.
Lebanon is listed among York County municipalities in the official York County municipal directory, which helps you locate the town and does not set deck rules. We confirm zoning, shoreland status, setbacks and permit scope with the Town of Lebanon before quoting any requirement.
For general framing references we use the American Wood Council deck resources, and when a project uses Trex boards, we follow the current Trex installation downloads. Neither source approves a project, so your written scope records the final details for your review.
Southern Maine Deck Builders will plan and build your Lebanon deck, led by owner Adam Bennett, a carpenter drawn to ledgers, framing, footings and clean joinery who also restores a cedar-strip canoe. We are A Seth's Home Pros Company; the parent is a referral business that never supervises, performs or guarantees construction or handles homeowner payments.
We build decks throughout York County, including Lebanon, and in every one of the 57 towns across Cumberland and York counties, islands included. Access, delivery and scheduling for each property are confirmed during our review, and the full town list is on our service areas page.
You should start planning a Lebanon deck once you have a rough size and material in mind, along with a budget range. A site visit and written scope come before construction, as does any required town review.
Timing depends on the permit process, material availability and our schedule, so we discuss dates only after review.
We lay out guards around open edges and stairs so they protect without blocking the view you care about. Post spacing, infill style and top rail height are confirmed against current requirements.
Stairs should land where you actually walk, such as toward the driveway, garden or yard. We plan the route, the landing surface at the bottom and the number of steps the grade requires.
We note where afternoon sun falls and where you want seating or a grill. You can hold real board samples in that light before choosing a color, since some surfaces warm up more than others.
A deck in Lebanon costs about $80 per square foot for basic pressure-treated work with a $10,000 minimum, or about $100 to $120 per square foot for complex or upgraded work. Composite starts at a $15,000 minimum with a project-specific quote, and minimums apply when area times rate falls lower.
| Deck project | Planning figure | Minimum |
|---|---|---|
| Pressure-treated wood | About $80/sq ft | $10,000 |
| Complex or upgraded work | About $100-120/sq ft | Scope dependent |
| Composite | Project-specific quote | $15,000 |
These are planning figures, not binding quotes; your written proposal sets the actual price.
Tell us about your lot, any existing deck and the material you are considering. We will set up a site visit and turn what we measure into a written scope for your Lebanon project.
