Call Now: (888) 915-4883Get a Deck Estimate

Wood and composite deck builders in Cumberland, ME

Our deck builders in Cumberland, ME plan new decks and complete replacements, with a choice of pressure-treated wood or composite/PVC for the surface. We start with your lot, entry height, access route and any existing deck, then put the full scope in writing before work begins.

Get My Free EstimateCall Now: (888) 915-4883
Deck builders in Cumberland, ME: low gray-brown deck with a single step, outdoor table and chairs, behind a gray shingled house
Wood, composite & PVC
Cumberland & York counties
Written project scope

Southern Maine Deck Builders plans new pressure-treated wood decks, composite and PVC decks, and complete deck replacements in Cumberland, Maine.

Basic pressure-treated decks plan at about $80 per square foot with a $10,000 minimum, complex or upgraded work at about $100 to $120 per square foot, and composite at a $15,000 minimum with a project-specific quote.

Each project starts with a site visit covering the house connection, footings, drainage and access, and all figures are planning numbers, not binding quotes.

Why choose deck builders in Cumberland, ME?

A deck is mostly hidden work, since the ledger, footings, framing and stairs carry everything you see, so we plan those parts first and then match boards, rails and finish to how you use the space. You get one written scope that names each item line by line, which makes quotes and decisions easier to compare.

  • A property review in Cumberland that looks at your actual parcel, slope, entry height and access route, since Cumberland County lots vary and town review depends on the specific property.
  • Planning figures stated up front, about $80 per square foot for basic pressure-treated work with a $10,000 minimum, so you can test a deck size against your budget early.
  • A carpenter-led approach to ledgers, footings, framing and joinery, with each connection, flashing detail and fastener choice written into the scope before any decking boards go down.
Open backyard lawn beside a light blue gable house, with a worn dirt path and tall pine and birch trees
Get My Free EstimateCall Now: (888) 915-4883

Get your free estimate request sent in 60 seconds!

What deck project are you planning?

Check all that apply.

Pick at least one to keep going.

Roughly what budget do you have in mind?

A ballpark is plenty. It tells us which contractors are the right fit.

$25,000
$10,000$150,000+
Anything else we should know? (optional)
What is your first name?

Please enter your first name.

And your last name?

Please enter your last name.

What town is your project in?

Please enter the town.

What email should we use?

Please enter a valid email.

Last one. Best number to reach you?
+1

Please enter a phone number we can reach you on.

Please tick the box so we can get back to you.

What deck material suits Cumberland homes?

Each material asks something different of you in cleaning, finish care and feel underfoot. We compare them against your sun exposure, how you use the deck and how much upkeep you want to handle.

Pressure-treated wood for a practical, repairable deck

Pressure-treated lumber is a direct way to build a sturdy deck and is the basis of our basic planning figure, about $80 per square foot. It feels like wood underfoot, and a damaged board can be replaced on its own.

Wood does ask for regular care, including cleaning and periodic stain or sealer, and full sun can speed up checking and fading. On a small deck, area times rate may land below our $10,000 project minimum, and the minimum then applies.

Composite and PVC for lower routine upkeep

Composite and PVC boards trade some of the cleaning and staining routine for a higher starting cost, with a $15,000 project minimum and pricing quoted for the specific product you choose. Color, texture and heat underfoot vary by line, so we look at real samples in your own light.

These boards still need occasional washing and the manufacturer's care instructions. They also depend on correct joist spacing, gapping and fasteners, which we take from the installation documents for your selected product.

Complete replacement when the old deck is uncertain

Complete deck replacement means removing the old boards, rails, stairs and framing, then rebuilding from the supports up to a new written plan. It suits decks where the frame, ledger or footings raise questions that new surface boards would only cover.

We do not judge an unseen deck as safe or failing by its age. After we look at the existing structure, the scope states what comes out, what changes in layout and which material goes back on.

Get My Free EstimateCall Now: (888) 915-4883

What deck services do we offer in Cumberland?

Our work in Cumberland covers three project types, each planned from a site review and recorded in a written scope. We focus on full new builds and full replacements, so the structure and surface are designed together.

  • Pressure-treated wood decks: New decks framed and surfaced in pressure-treated lumber, planned at about $80 per square foot for basic layouts with a $10,000 minimum.
  • Composite and PVC decks: New decks surfaced in composite or PVC boards, quoted for the specific product line you pick, with a $15,000 project minimum.
  • Complete deck replacement: Removal of the existing deck and a full rebuild, with new supports, framing, stairs and rails specified in the written scope.
Get My Free EstimateCall Now: (888) 915-4883

What keeps a deck's house connection sound?

Ledger and flashing

Where a deck attaches to the house, we check the rim, siding and existing flashing, then plan fasteners and layered flashing that steer water away from the ledger and wall framing.

Hidden fasteners and hardware

Hidden clips, screws and joist hangers must suit the decking line and treated lumber. We choose fasteners and connectors that the decking and hardware instructions list as compatible.

Door transition

The step from your door to the deck surface affects comfort and water entry. We set deck height around the existing threshold and plan for seasonal movement so boards do not crowd the door.

Not sure how to plan a deck project in Cumberland?

  1. Man holding a clipboard and woman pointing toward the back of a light blue house during an outdoor yard discussion

    Site visit and measurements

    We visit your Cumberland property to measure the house wall, entry height, yard slope and any existing deck, and to walk the route for deliveries and debris. We then discuss materials, layout and budget against the planning figures and prepare a written scope that lists each part of the job.

  2. Undecked wood deck frame with joists set on concrete piers on a lawn beside a gray sided house

    Footings and framing

    After any old deck is removed and required town steps are complete, we set footings, attach and flash the ledger, and frame joists and beams to the plan. You can see the structure before decking goes on, and we review any changes with you in writing.

  3. Two people standing on a low wood-toned deck with a step to the door of a white sided house

    Final walkthrough

    After decking, rails and stairs are installed, we walk the finished deck with you and check each item against the written scope. We also go over the care instructions for your material and note any open items, including any final inspections the town requires for your project.

Get My Free EstimateCall Now: (888) 915-4883

What should your Cumberland lot plan show?

Footings sized to your site

Footing size, depth and spacing depend on deck loads, span layout and conditions found on your property. We confirm those details through the design and any required town review.

Drainage and airflow

We look at where roof runoff and yard water go, and how much air can move under the frame. Grading, downspouts and open skirting choices affect how quickly the framing dries after rain.

Site access

Lumber deliveries, debris removal and equipment need a workable route to the build area. We note gates, septic or utility areas, slopes, plantings and anything else on your property that limits access.

What should we check before building in Cumberland?

Before we draw a plan, we check your parcel layout, where the deck meets the house, the condition of any existing structure and how materials can reach the yard. These details vary from one Cumberland lot to the next, so we confirm them in person.

The Town of Cumberland's Code Enforcement office reviews plans, conducts construction inspections and lists building permit application information. We use that page as the starting point and confirm with the office what your specific parcel and deck design require.

For general framing guidance we refer to the American Wood Council's deck resources, and for composite installs we follow the selected manufacturer's current documents, such as the Trex installation downloads. Neither source sets your local requirements, so everything we confirm goes into your written scope.

Black metal railing panel with vertical balusters along the edge of a low wood deck beside light blue siding
Get My Free EstimateCall Now: (888) 915-4883
Low light wood deck with one step, a wooden table, and chairs beside a gray shingled house on a lawn

Who plans and builds your Cumberland deck?

Owner Adam Bennett plans and oversees your Cumberland deck, paying close attention to the frame and its attachment to the house. His interest in clean joinery also shows in his spare-time project: restoring a cedar-strip canoe.

Our parent company, only makes referrals and never performs, supervises or guarantees construction or handles payments between homeowners and contractors.

Where in Cumberland County do we build decks?

We build decks throughout the town of Cumberland, including properties around Cumberland Center, and across all 57 towns in Cumberland and York counties, including islands. Access, delivery routes and scheduling for each property are confirmed during our review, and our service areas page lists every town we cover.

When should you start planning a Cumberland deck?

You should start planning a Cumberland deck as soon as you know roughly what you want, since the site visit, design choices, material selection and any town review all take time. We do not promise a universal start or finish date; your timeline depends on scope, the parcel and current scheduling.

Get My Free EstimateCall Now: (888) 915-4883

How should the deck work day to day?

Railings and guards

Guard placement shapes views, furniture layout and safety at open edges. We plan rail runs, post locations and infill style together so the railing fits how you sit, gather and move.

Stairs and landings

Stairs should land where people actually walk, such as a path, driveway or yard door. We map the route, the landing surface at the bottom and the handrail locations before framing begins.

Sun and shade

Afternoon sun can make some surfaces hot and fade some colors faster. We note how your deck faces, where seating will go, and compare physical samples outside at your house before you choose.

How much does a deck cost in Cumberland?

Basic pressure-treated decks in Cumberland plan at about $80 per square foot with a $10,000 project minimum, and complex or upgraded work runs about $100 to $120 per square foot. Composite has a $15,000 minimum and a project-specific quote, and the minimum applies when area times rate comes in lower.

Deck projectPlanning figureMinimum
Pressure-treated woodAbout $80/sq ft$10,000
Complex or upgraded workAbout $100-120/sq ftScope dependent
CompositeProject-specific quote$15,000

These are planning figures, not binding quotes; your written price follows the site review.

Get My Free EstimateCall Now: (888) 915-4883

Deck planning in towns near Cumberland

Neighboring towns

See every town we serve
Get My Free EstimateCall Now: (888) 915-4883

Ready to plan your Cumberland deck?

Send us your address, a few photos of the house wall or existing deck, and a rough size you have in mind. We will arrange a site visit and start your written scope from there.

Get My Free EstimateCall Now: (888) 915-4883