Call Now: (888) 915-4883Get a Deck Estimate

Wood and composite deck builders in Kennebunk, ME

We work as deck builders in Kennebunk, ME, planning new decks and complete replacements with pressure-treated lumber or composite/PVC surfaces. Each project starts with your actual lot, entry height, access route and existing deck condition, all written into a clear scope.

Get My Free EstimateCall Now: (888) 915-4883
Deck builders in Kennebunk, ME: low gray-brown deck with a wide step and outdoor dining set behind a white house with sliding doors
Wood, composite & PVC
Cumberland & York counties
Written project scope

Southern Maine Deck Builders plans and builds new pressure-treated wood decks, composite and PVC decks, and complete deck replacements in Kennebunk, with a site visit and written scope first.

Planning figures are about $80 per square foot for basic pressure-treated work with a $10,000 minimum, about $100-120 per square foot for complex or upgraded work, and a $15,000 minimum for composite, which is quoted per project.

Permit, setback and inspection questions go to the Town of Kennebunk for each parcel, and the written scope records the ledger, footings, drainage, stairs, rails and access we checked.

Why choose deck builders in Kennebunk, ME?

The right deck builders settle the structure before anyone picks a board color. We look at how the deck meets your house, what holds it up, where water goes and how materials reach the yard.

That order keeps the conversation practical, so the price you see reflects the framing, stairs, rails and demolition your Kennebunk project actually needs.

  • Comparable quotes: our written scope lists demolition, framing, footings, stairs, rails and material line, so you can compare any Kennebunk bid line by line before choosing.
  • Town review early: we raise your lot's permit, setback and inspection questions with the Town of Kennebunk before design is final, because those answers depend on your parcel.
  • Carpentry you can inspect: Adam Bennett, our owner, cares about ledgers, footings and clean joinery, and he walks you through the frame before decking covers it.
Open mowed backyard behind a two-story cream clapboard house with a bare soil strip at left and tall trees beyond
Get My Free EstimateCall Now: (888) 915-4883

Get your free estimate request sent in 60 seconds!

What deck project are you planning?

Check all that apply.

Pick at least one to keep going.

Roughly what budget do you have in mind?

A ballpark is plenty. It tells us which contractors are the right fit.

$25,000
$10,000$150,000+
Anything else we should know? (optional)
What is your first name?

Please enter your first name.

And your last name?

Please enter your last name.

What town is your project in?

Please enter the town.

What email should we use?

Please enter a valid email.

Last one. Best number to reach you?
+1

Please enter a phone number we can reach you on.

Please tick the box so we can get back to you.

What deck material suits Kennebunk homes?

The deck material that suits your Kennebunk home depends on how much upkeep you accept, how the deck sits in the sun and which project minimum fits your budget. Here is how the three paths compare.

Pressure-treated wood for a practical, repairable deck

Pressure-treated wood is a direct way to get a sturdy, practical deck. It has a familiar feel underfoot, cuts and fastens with standard tools, and individual boards can be replaced later without hunting for a matching product line.

The tradeoff is upkeep. Wood needs periodic cleaning and a stain or sealer schedule you are willing to keep, and boards in full sun tend to check and move more than shaded ones.

Basic builds plan at about $80 per square foot.

Composite and PVC for lower routine upkeep

Composite and PVC boards suit owners who want less sanding and staining. They skip the stain cycle of wood, and they come in colors and textures we bring as real samples to judge in your own light.

They still need cleaning and the selected manufacturer's care and installation instructions, which can set joist spacing, fastener type and gapping. Darker boards can get hot in direct sun.

Composite projects start at a $15,000 minimum.

Complete replacement when the old frame is in question

Complete replacement makes sense when the existing frame, ledger or footings cannot be trusted under new boards. We remove the old deck, look at what the house connection and ground reveal, and build a new structure to the written scope.

We do not diagnose a deck from photos or tell you it is safe to use. Demolition, disposal, flashing work at the ledger and new stairs all belong in the written price so bids compare fairly.

Get My Free EstimateCall Now: (888) 915-4883

What deck services do we offer in Kennebunk?

We offer three deck services in Kennebunk: new pressure-treated wood decks, new composite or PVC decks, and complete replacement of an existing deck. Each one gets the same site review and written scope before work begins.

  • Pressure-treated wood decks: New decks framed and surfaced in treated lumber, sized to your entry height, yard and budget, starting from a $10,000 project minimum.
  • Composite and PVC decks: Treated framing built to the chosen board manufacturer's installation instructions, with composite or PVC decking, matched fasteners and a $15,000 minimum.
  • Complete deck replacement: Removal of the existing deck, a fresh look at the ledger and supports, and a new structure built to the written scope.
Get My Free EstimateCall Now: (888) 915-4883

What keeps the deck connection sound?

Ledger and flashing

A sound deck connection starts at the ledger. We check the house rim and sheathing where it attaches, then plan fasteners and flashing that keep water moving away from the wall.

Hidden fasteners and hardware

Fasteners and connectors must suit treated lumber and the decking you choose. For composite or PVC, we follow that product's current instructions for clip type, screws and spacing so the surface stays secure.

Door transitions

The step from your door to the deck deserves its own measurement. We set the deck surface relative to the threshold, leave room for flashing and seasonal movement, and keep the door swing clear.

Not sure how to plan a deck project in Kennebunk?

  1. Two men talking in a backyard, one holding a clipboard while the other points toward a cedar shingled house with French doors

    Site visit and measurements

    We visit the property, measure the house wall, door threshold and yard, and check the existing deck, ledger area and access route for deliveries. You then get a written scope listing materials, structure, stairs, rails, demolition and price, along with the questions we will raise with the Town of Kennebunk.

  2. Undecked rectangular wood frame with evenly spaced joists resting on blocks in an open lawn in front of a shingled cape house

    Footings and framing

    Once the scope is approved and any town requirements are addressed, we set footings, install the ledger and flashing where the deck meets the house, and build the frame. Before any decking goes down, we walk you through the structure so you can see the connections, joists and supports that the boards will cover.

  3. Two men stand on a finished low wood deck with a wide step beside a light blue house with lawn and trees

    Final walkthrough

    We install decking, stairs and railings, then clean up the work area and remove the debris covered by the scope. Together we walk the finished deck against the written scope, review care steps for your chosen material and note any item that still needs attention before we call the job complete.

Get My Free EstimateCall Now: (888) 915-4883

What should your Kennebunk lot plan show?

Footings sized to your site

Your lot plan should show where each footing goes and how it is sized. We base that on deck span, loads and the conditions we find on your site, then check requirements with the town.

Drainage and airflow

Water should move away from the area under the deck. We look at downspouts, grade and clearance beneath the joists so posts stay out of standing water and the framing can dry between rains.

Site access

Lumber, footing materials and debris need a workable route. We note driveway space, gate widths, slopes, septic or utility areas and nearby plantings, since those details affect staging, scheduling and cost.

What should we check before building in Kennebunk?

Before building in Kennebunk, we check your parcel, your house connection and your access. That means reviewing any survey or plot plan you have, noting where the deck meets siding and doors, and walking the delivery route so site conditions are seen firsthand.

For permits, setbacks and inspections, the deciding source is the Town of Kennebunk, starting with the Official Kennebunk municipal website. We bring your lot's questions there early and never assume an exemption, setback or approval timeline for a parcel.

Your written scope records what we checked and what we will build. For framing and connection details, we refer to the American Wood Council's deck resources; if you select Trex boards, we follow the current Trex installation downloads.

Neither source reviews or endorses our work.

Wide low wood deck with a centered step across the back of a gray two-story house on a lawn
Get My Free EstimateCall Now: (888) 915-4883
Low wood deck with a step and an outdoor table with chairs beside a two-story cream clapboard house with sliding doors

Who plans and builds my Kennebunk deck?

Adam Bennett plans and leads your Kennebunk deck, from measurements to the final walkthrough. His carpentry interests start with the frame and its connections, including footing layout.

Off the clock, he restores a cedar-strip canoe and enjoys the patient fitting work that involves. We are A Seth's Home Pros Company, and that referral business does not build, supervise, guarantee or handle payment for our work.

Where do we build decks near Kennebunk?

We build decks in Kennebunk and across all 57 towns in Cumberland and York counties, islands included. Access and scheduling for any location are reviewed property by property before we commit to dates.

Our address is 106 Lafayette Street, Suite 1D, Yarmouth, ME 04096, and every covered town is listed on our service areas page.

When should I start planning a deck?

You should start planning a deck once you know what the space is for, well before you need it finished. Town review and material availability shape timing, while weather affects exterior work.

We also check our current schedule, setting dates after the site visit and written scope. No single timeline fits every Kennebunk parcel.

Get My Free EstimateCall Now: (888) 915-4883

How should the deck work day to day?

Railings and guards

Your deck should work day to day as a place people move through easily. We lay out guards around open edges and stairs, choosing a rail style that fits the material line and the view.

Stairs and landings

Stairs should land where you actually walk, toward the driveway, garden or yard. We plan the route, any landing and the ground surface at the bottom so the path feels natural.

Sun and shade

Seating works best where the light suits how you use the deck. We note morning and afternoon exposure, then compare real board samples on site, since color and surface heat look different outdoors.

How much does a deck cost in Kennebunk?

A deck in Kennebunk plans at about $80 per square foot for basic pressure-treated work, with a $10,000 project minimum. Complex or upgraded work plans at about $100-120 per square foot.

Composite starts at $15,000 and is quoted per project. A minimum applies when area times rate comes in lower.

Deck projectPlanning figureMinimum
Pressure-treated woodAbout $80/sq ft$10,000
Complex or upgraded workAbout $100-120/sq ftScope dependent
CompositeProject-specific quote$15,000

These are planning figures and not binding quotes; your written scope sets the actual price.

Get My Free EstimateCall Now: (888) 915-4883

Deck planning in nearby York County towns

Neighboring towns

See every town we serve
Get My Free EstimateCall Now: (888) 915-4883

Ready to plan your Kennebunk deck?

Planning your Kennebunk deck starts with a short message. Send us your address, photos of the deck area and the material you are leaning toward, and we will arrange a site visit.

Get My Free EstimateCall Now: (888) 915-4883