Our deck builders in Frye Island, ME plan new builds and complete replacements for homes across the town, with pressure-treated wood or composite/PVC boards. We start with your lot, your door height and the route materials will take to reach you.
Southern Maine Deck Builders plans and builds new pressure-treated wood decks, composite and PVC decks, and complete deck replacements in Frye Island, Maine.
Basic pressure-treated decks plan at about $80 per square foot with a $10,000 minimum, and complex or upgraded work plans at about $100 to $120 per square foot. Composite projects start at $15,000, and all figures are planning numbers rather than binding quotes.
Each project starts with a site visit covering the house connection, footings, drainage and property access. A written scope and a check of current town requirements for the parcel follow.
We build decks as structures first and surfaces second. Before anyone talks about board color, we look at how the deck attaches to your house, what carries it to the ground and how people will move across it.
Owner Adam Bennett keeps the plan focused on a properly supported frame and sound house attachment. His interest in careful footing layout and clean joinery shapes the written scope.
The right material depends on how much upkeep you want, how the deck sits in sun or shade and how you plan to use it. Each option below starts with the same framing review.
Pressure-treated lumber is a direct way to get a sturdy, practical deck at our basic planning figure of about $80 per square foot. It takes fasteners well, can be cut and fitted on site and gives a familiar wood feel underfoot.
Wood does ask for regular attention. Plan on periodic cleaning and a stain or sealer schedule, and expect some checking and color change as boards dry and weather.
We help you decide if that routine suits you.
Composite and PVC boards trade some of wood's upkeep for a higher starting cost. Composite projects begin at our $15,000 minimum, and we price them per project because board line, railing system and framing needs vary widely.
These boards still need cleaning, and each product line has its own joist spacing, gap and fastener instructions. Some surfaces run warmer in direct sun, so we bring real samples to your deck location before you choose.
Complete replacement makes sense when the existing frame, ledger or footings can't be trusted to carry new boards. We remove the old deck, inspect the house wall behind it and build a new structure sized for your chosen material.
We can't judge an unseen deck from photos, so we look at it in person before recommending anything. Demolition, disposal and how we handle hidden damage at the house connection are written into the scope before work begins.
We keep our work focused on three kinds of deck projects. Each one starts with a site review and a written scope, and each is measured against the planning figures listed below.
Where a deck meets the house, water is the main threat. We check the rim and sheathing behind the ledger and plan flashing that sheds water away from the wall.
Hidden fastener systems are made for specific board profiles. We match clips, screws and connectors to the decking line you choose and to the treated lumber they touch, following the maker's current instructions.
The step from your door to the deck surface should feel natural and keep water out. We measure the threshold, account for board thickness and leave room for seasonal movement so the door opens freely.
We visit the property to measure the house wall, door height, grade and any existing deck, and we walk the route materials will take to reach the work area. You leave the visit with a clear sense of options, the planning figure that fits and what still needs town or parcel review.
Once the written scope is approved, we set footings, install the ledger with flashing and build the frame before any decking goes down. This stage is where joist spacing, beam placement, hardware and connections are checked against the plan, because finished boards will cover that work.
After decking, railings and stairs are installed, we walk the finished deck with you and compare it line by line against the written scope. We also go over cleaning and care for your chosen material and point you to the manufacturer's current guidance where it applies.
Footing size, spacing and depth depend on the deck's span, its load and the ground on your parcel. We set them from the site review and current local requirements, never from a template.
Water that collects under a deck keeps framing damp longer. We look at how runoff moves across your lot, where roof water lands and how much open space the frame needs to dry between rains.
Lumber, decking and equipment have to reach the work area. We confirm the actual route to your property, any water or seasonal access limits, and where materials can sit without blocking driveways or septic areas.
Before building in Frye Island, we check the parts of your property that drive cost and structure. That means the existing deck or house wall, the door height, how the lot drains and how crews and materials will actually reach the site.
Frye Island is listed as a municipality in the official Cumberland County municipal directory. That directory confirms the town's place in the county only; deck permits, setbacks and any shoreland rules come from the town itself, and we confirm them for your parcel.
Everything we find goes into a written scope you can review before work starts. We use the American Wood Council decks resources for general framing background and, if you select Trex boards, the current Trex installation downloads; neither reviews our work.
Southern Maine Deck Builders builds decks for Frye Island homeowners, with owner Adam Bennett leading planning and framing decisions. Adam works through the supporting connections with a carpenter's care for fit.
Restoring a cedar-strip canoe is his project away from decks. We are A Seth's Home Pros Company; that referral business does not perform, supervise or guarantee our construction or handle payments.
We build decks in Frye Island and in all 57 towns across Cumberland and York counties, including island properties. Island access and scheduling depend on each property, so we review the route before committing to dates.
Our service areas page lists every covered town in both counties.
You should start planning a deck once you know what you want the space to do and before you need it finished. Material lead times, town review and access to your property all affect scheduling, so we set dates only after the site visit and written scope.
Railings shape the view and safety of the deck. We lay out posts so they line up with framing, keep sightlines open from your seating and meet the guard requirements that apply to your project.
Stairs should land where you actually walk, near a path, driveway or garden. We plan the stair route, rise and landing together so the descent feels steady and the bottom step meets firm, drained ground.
A deck that faces afternoon sun feels very different from one under trees. We note exposure at your seating area and test real board samples there, since color and material change how warm surfaces get.
A basic pressure-treated deck in Frye Island costs about $80 per square foot as a planning figure, with a $10,000 project minimum. Complex or upgraded work runs about $100 to $120 per square foot.
Composite projects start at $15,000 and are quoted per project. The minimum applies when area times rate is lower.
| Deck project | Planning figure | Minimum |
|---|---|---|
| Pressure-treated wood | About $80/sq ft | $10,000 |
| Complex or upgraded work | About $100-120/sq ft | Scope dependent |
| Composite | Project-specific quote | $15,000 |
These are planning figures, not binding quotes; your written scope sets the actual price.
Send us your address, a few photos of the house wall or existing deck and a rough size, and we will set up a site visit to measure and talk through options.
