Homeowners comparing deck builders in Windham, ME can start with a clear plan for a new pressure-treated deck, a composite or PVC deck, or a complete replacement. We review your lot, entry height, access route and any existing deck before writing a scope.
Southern Maine Deck Builders plans new pressure-treated decks, composite or PVC decks and complete deck replacements for Windham homeowners in Cumberland County.
Basic pressure-treated work plans at about $80 per square foot with a $10,000 minimum, complex or upgraded work at about $100 to $120 per square foot, and composite projects carry a $15,000 minimum with project-specific pricing.
Each project starts with a site visit covering the house connection, footings, drainage, access and entry height, followed by a written scope that records materials, structure, stairs, rails and demolition.
We focus on three kinds of work, new pressure-treated decks, composite or PVC decks and complete deck replacement, so the first visit goes to the parts that decide how a deck holds up: the house connection, supports, stairs and guards. Every Windham project then gets a written scope before work begins, which becomes the reference for every later decision.
The right material depends on how much upkeep you want, how the deck sits in sun or shade and how the boards will feel underfoot. Here is how our three project types compare.
Pressure-treated lumber gives you a solid, familiar deck at our lowest planning figure, about $80 per square foot for basic work, with a $10,000 project minimum. It has the natural feel of wood and can be stained or left to weather.
Wood asks more of you over time. Expect periodic cleaning, a finish schedule that suits your exposure and the occasional board or fastener check, especially on surfaces that stay damp in shade.
Composite and PVC boards skip the staining and sealing cycle that wood needs, which appeals to owners who would rather spend summer weekends using the deck. Composite projects start at a $15,000 minimum, and we price each one from the selected product line.
These boards still need cleaning, and some colors run warmer in full sun. We use the chosen manufacturer's current instructions to set the board gaps and fastening method, and follow its guidance on cleaning the finished surface.
Some decks look tired on top while the real questions sit underneath, at the ledger, the posts and the footings. A complete replacement removes the old structure and rebuilds from the supports up, using wood or composite on a new frame.
We do not judge an unseen deck as safe or unsafe. During the visit we note what we can observe, and the written scope states what will be removed, hauled away and rebuilt.
Our work in Windham stays within three services so each project gets the same careful attention to structure and detail. If your plans fall outside these, we will tell you plainly during the first conversation.
Where a deck attaches to the house, we check the rim board, siding and existing flashing and plan how water will shed away from the framing. Fastener and flashing details go into the scope.
Composite and PVC boards often use clip systems specific to the product line. We match clips, screws and connectors to the selected decking and to the treated lumber they contact.
The step from your door to the deck surface should feel natural and keep water away from the threshold. We measure the entry height and plan the board level so the door swings clear.
We meet you at the property to measure the deck area, check the house connection and entry height, and walk the delivery route from the driveway to the build site. Afterward we send a written scope that lists materials, structure, stairs, rails and any demolition, along with a price based on our planning figures.
Once you approve the scope and any required permits are in place, we set footings and posts, then build the beams, joists and ledger connection that carry the deck. Owner Adam Bennett pays particular attention to this stage, since square framing and clean joinery decide how the finished surface looks and wears.
After the decking, stairs and rails are installed and the site is cleaned up, we walk the finished deck with you and check each item against the written scope. We also go over care for your chosen material and leave you with the manufacturer's documents for composite or PVC boards.
Support locations and sizes depend on the deck's span, load, height and what we find at your property. We confirm current local requirements for your specific parcel before finalizing the layout.
We look at where roof and yard runoff travels around the deck area. Leaving room for air to move beneath the framing helps the structure dry after rain and snowmelt.
Lumber, decking and equipment need a route from the driveway to the build area. We walk that path with you and note gates, septic areas, slopes, plantings or utilities that could affect it.
Before any design is final, we confirm where the deck will sit on your lot, how it meets the house and how crews and materials reach it. A sloped yard, a tight side gate or a high entry door each change the plan.
Permits, setbacks and any shoreland rules are decided by the Town of Windham, so we check current requirements for your parcel through the official Windham municipal website and its code enforcement office. For general background, the American Wood Council deck resources explain wood construction principles.
The written scope records the selected decking and its supporting frame, including footings and the house attachment. It also describes the stairs and guard runs we have confirmed with you.
If you select Trex boards, we install from the current Trex installation downloads, which apply to that manufacturer's products only.
Our crew builds your Windham deck under owner Adam Bennett, a carpenter interested in the frame and how its connections fit together. He brings that same patience to restoring a cedar-strip canoe in his spare time.
We are A Seth's Home Pros Company; our parent company is a referral business and does not perform, supervise or guarantee construction or handle project payments.
We build decks in all 57 towns of Cumberland and York counties in Southern Maine, including Windham and the island communities. Every property gets its own review of access and scheduling, which matters most for island work, and our service areas page lists each town we cover.
You should start planning a Windham deck well before you hope to use it, since the design, material selection and any municipal review all take time. The start date reflects the agreed scope and any permit review, along with material availability.
Weather conditions and our current schedule also affect timing, so we confirm those details for your project.
Guard placement shapes how the deck feels to sit on and look out from. We lay out posts and rail sections around your seating and sightlines, following the requirements that apply to your deck height.
Stairs should land where you actually walk, toward the driveway, garden or yard. We plan the run, any landing and the ground surface at the bottom so the route stays practical in every season.
Afternoon sun, tree cover and house shadows change how warm the boards get and where seating feels comfortable. We bring physical samples so you can see colors outdoors at your own house.
A Windham deck is planned at about $80 per square foot for basic pressure-treated work, with a $10,000 minimum, or about $100 to $120 per square foot for complex or upgraded work. Composite starts at a $15,000 minimum and is priced per project, and any minimum overrides area times rate.
| Deck project | Planning figure | Minimum |
|---|---|---|
| Pressure-treated wood | About $80/sq ft | $10,000 |
| Complex or upgraded work | About $100-120/sq ft | Scope dependent |
| Composite | Project-specific quote | $15,000 |
These are planning figures, not binding quotes; your written scope sets the actual price.
Send us a few photos of your yard and any existing deck, along with rough dimensions, and we will set up a site visit to measure and talk through materials and planning figures.
